Idrotech / Fog Maker ATEX
idrotech_logo_FMAtex(0)
idrotech_Fog-Maker-ATEX

Fog Maker ATEX

icona_made-in-italy(0)
icona_CE(0)

The system designed and developed especially for use in areas subject to the risk of explosion. Fog Maker ATEX is the new high pressure cannon (50bar) designed for dust suppression, and in particular of carbon and sulphur dust.
 The jet from Fog Maker ATEX can reach 60 metres without wind, and can rotate from 0 to 340°.

Compliant with EU directive 94/9/EC for the control of equipment destined for use in zones subject to the risk of explosion
highlights
Idrotech-Misting-industriale-Fog-Maker-ATEX_hi-li1
Detail of the Fog Maker ATEX cannon outlet highlighting the ring of 156 atomiser nozzles
Idrotech-Misting-industriale-Fog-Maker-ATEX_hi-li2
Noise barrier
 to reduce the noise of the Fog Maker during operation
Idrotech-Misting-industriale-Fog-Maker-ATEX_hi-li3
Detail of fan installed on Fog Maker ATEX cannon
Idrotech-Misting-industriale-Fog-Maker-ATEX_hi-li4
Steel platform: practical handing
Technical data
CODE Model Weight Dimensions WxLxH (mm)
IT.9063 ATEX HP 50bar 340kg 1430 x 870 x 160
Technical data
Operating pressure: 50bar
No. of nozzles: 3 ring with 52 nozzles
Maximum coverage: approx. 10.700m2
Air flow rate: 28.500 m3/h
Power absorption:
 fan 11kW
ring heating 2kW
Power supply: 480 V-60Hz
Protection rating: IP65
Rotation angle: 340
Elevation: -20° +45°
Fan diameter: 660mm
2800Rpm
Flow range: approx. 60m
Noise: < 93Lwa
The electric control panel will be designed and produced according to the required application
On request, it can be equipped with a pump unit with flow rate from 21 to 42l/min
optionals / IT.9063
Tailor-made misting systems
IBG_Idrotech_Immagine-Banner(1)