.png)
.png)
.png){kind=logo}
.png){kind=logo}
.png){kind=logo}
.png)
.png){kind=logo}
Club dei Riparatori / Total-Stop device
products
CDR.0747
Total-Stop device, for COLD high pressure washers,
up to 5,5HP, 400V-50/60Hz
Total-Stop timed device, equipped with transformer to enable autonomous control of the device.
Ideal for h.p. washers three-phase 400V, 50-60Hz, enables motor switch-off (15 sec.).
WARNING! Must be installed with an unloader valve
(WITHOUT pressure reduction) and 2 pressure switches.
up to 5,5HP, 400V-50/60Hz
Total-Stop timed device, equipped with transformer to enable autonomous control of the device.
Ideal for h.p. washers three-phase 400V, 50-60Hz, enables motor switch-off (15 sec.).
WARNING! Must be installed with an unloader valve
(WITHOUT pressure reduction) and 2 pressure switches.
CDR.0748
Total-Stop device, for COLD and/or HOT high pressure washers, up to 7,5HP, 230-400V-50/60Hz
Total-Stop timed device, equipped with transformer to enable autonomous control of the device. It can be supplied with high voltage 230V or 400V at 50-60Hz, enables motor switch-off (15 sec.) and delayed restart of the burner (3 sec.).
WARNING! Must be installed with an unloader valve
(WITHOUT pressure reduction) and 2 pressure switches.
Total-Stop timed device, equipped with transformer to enable autonomous control of the device. It can be supplied with high voltage 230V or 400V at 50-60Hz, enables motor switch-off (15 sec.) and delayed restart of the burner (3 sec.).
WARNING! Must be installed with an unloader valve
(WITHOUT pressure reduction) and 2 pressure switches.
CDR.0749
Total-Stop device, for COLD and/or HOT high pressure washers, up to 10HP, 230-400V-50/60Hz
Total-Stop timed device, equipped with transformer to enable autonomous control of the device. It can be supplied with high voltage 230V or 400V at 50-60Hz, enables motor switch-off (15 sec.) and delayed restart of the burner (3 sec.).
WARNING! Must be installed with an unloader valve
(WITHOUT pressure reduction) and 2 pressure switches.
Total-Stop timed device, equipped with transformer to enable autonomous control of the device. It can be supplied with high voltage 230V or 400V at 50-60Hz, enables motor switch-off (15 sec.) and delayed restart of the burner (3 sec.).
WARNING! Must be installed with an unloader valve
(WITHOUT pressure reduction) and 2 pressure switches.
CDR.0753
Water splash protection kit IP54 for ISKRA Circuit breaker switches ISKRA
The winning solution to manufacture and repair all kinds of pressure washers
