The new Idrobase 200-15 Industrial pump has been designed to be used in many applications in an industrial context, both in the misting and cleaning sectors. Compared to the Professional FS2 200-15 pump, already in the
First of all the weight. With 11,5kg, the new pump weighs +15% compared to the Professional pump, to allow greater resistance with continuous use. The higher oil capacity – 0,7Kg - represents a +40% capacity compared to the professional pump, allowing the Industrial pump to be better lubricated and cooled.
The W1/W2 Parker water seals, with self-lubricating U profile, compared to the V-profile sealing rings of the previous pump, allow a more dynamic sealing that does not require settling, avoiding possible water drops losses that may occur after a long period of inactivity. The detail of U-shaped seal profile increases the duration by +40%, with replacement scheduled after 1.000 hours of work.
The plunger oil seals, unlike the previous model, are equipped with a dust cover to protect from atmospheric agents and dust, thus avoiding the accumulation of impurities on the pistons resulting in + 30% of the life of the oil seal.
The connecting rods of the new professional pump are made of bronze instead of
Moreover, the oversized guide pistons discharge better the thrusts, maintaining a perfect and lasting alignment with the seals, while the wide support surface of the seal rings serves to distribute the thrust of the rings on the casing on a more extended surface, thus avoiding the breaking of the crankcase with consequent displacement of the rings and losses from the piston seals.